How to find your evacuation zone and sign up for alerts

Type your home address into Genasys Protect at protect.genasys.com, or into your county's own zone map if it keeps one. Write the zone name down. Then sign up for your county's free emergency alerts. Alerts during a fire name the zones they apply to, so knowing yours tells you whether a warning means you.

On this page
  1. The short version
  2. Why does your evacuation zone name matter?
  3. How do you find your zone and write it down?
  4. How do you sign up for alerts?
  5. How do you make sure your phone gets the alerts?
  6. What will the alerts say?
  7. What do people get wrong about evacuation zones?
  8. Questions people ask
  9. Sources
A two-story cream stucco house with a tile roof, green shutters and an arched front entry on a dry hillside
Alerts during a fire name the zones they apply to, so look up the zone for your own address before you need it.

The short version

  • Search your home address on protect.genasys.com or your county's zone map and then write the zone name down where you'll see it.
  • Cal OES says all 58 California counties offer free emergency alerts, which you can sign up for through calalerts.org/signup.html.
  • In Los Angeles, San Diego, Riverside and Sonoma counties, your cell phone and email get county alerts only if you register them.
  • Then check your phone's settings, because Ready.gov says some phones need Wireless Emergency Alerts turned on.

Why does your evacuation zone name matter?

Your zone name is how you tell whether an alert means you. Genasys says the zone name is what emergency alerts use to identify the areas they apply to.

Counties and cities draw zones so they can alert one neighborhood without alerting the whole county. Oakland says it was zoned "so the City can send focused alerts to specific neighborhoods." If you know your zone, you can read a list of zone names and tell in a few seconds whether it includes you.

Zones are their own map. Oakland says a Genasys Protect zone isn't the same as a police beat, a fire district or a council district. So you can't work out your zone from your ZIP code or your fire station. You have to look it up.

How do you find your zone and write it down?

Look it up once by address and write the name where you'll see it. The 8 steps in this article go in order, starting with the zone and ending with your phone's settings. The whole job takes one sitting.

Step 1: Look up your zone by address

Go to protect.genasys.com on a phone or computer. Genasys says to "type your address into the search bar at the top left" and press Enter. You don't need an account to search.

The map zooms to your zone and outlines it in green. A pop-up shows the zone's ID and its current status. The panel on the left gives the area's common name and describes the zone's boundaries.

A zone ID can start with a short code for the place. Oakland says most of its neighborhood zones begin with "OKL," for example.

If your county keeps its own map, use that one too. Sonoma County, for example, has its own Zone Lookup Tool and an interactive map at socoemergency.org. If you aren't sure which map your county uses, search for your county's office of emergency services and look for its evacuation zone page.

Step 2: Write the zone name down where you'll see it

Genasys tells people to "write down the name of your zone somewhere easily visible." Put it on the fridge, in your phone's notes and in your car.

During an evacuation you might be reading alerts on someone else's phone or listening to a radio. That isn't the moment to search a map.

Sonoma County suggests 2 more places for it:

  • Your family's emergency plan.
  • A message to friends or family who live out of town, so they can follow the fire news for you.

Step 3: Look up the zones for work, school and family

Your home zone is only one of them. Sonoma County tells residents to learn the zones near their workplace and the other places they go often.

Look up the address of your job, your kids' school or daycare and any relative you'd go and help. Write those zones down beside your own.

How do you sign up for alerts?

Start with your county's system. Then add your city's system if it has one. The Genasys Protect app comes last, on top of the other 2.

Step 4: Sign up for your county's alerts

Cal OES said on May 15, 2024 that "every California county offers free emergency alerts." The state's page at calalerts.org/signup.html has a sign-up link for each of the 58 counties. Cal OES says that "in most cases you will need to provide a mobile phone number and an email address."

Genasys Protect has a shortcut. In the left panel for your zone, a "Subscribe to Alerts" button under Community Links opens your county's sign-up page. Genasys says some zones don't show the button, because not every county has a sign-up site for residents.

Each county's system has its own name and its own rules about who's already on the list. Here's how 4 counties with a lot of fire country describe their systems on their own pages:

County Alert system Landlines What you have to register
Los Angeles Alert LA County (alert.lacounty.gov) The county calls it an "opt-in" program, so plan to register every number yourself. Every phone and email you want alerts on. It sends calls, texts and email.
San Diego AlertSanDiego (alertsandiego.org) Listed and unlisted landlines are called from the 911 phone list. Cell phones, VoIP lines and email. An accessible option sends alerts as ASL video with English voice and text.
Riverside Alert RivCo (rivco.genasys.com/portal/en/register) The primary landline at each home and business is entered automatically. Cell phones and VoIP lines "must be enrolled by the user."
Sonoma SoCoAlert (socoemergency.org) You choose landline calls when you sign up. Cell texts, recorded calls, email and devices for the deaf.

The table shows why you should sign up even if you have a landline. A landline is the one phone that stays at home when you leave. In all 4 counties, your cell phone and your email get alerts only if you register them.

When you register, use the home address you looked up in step 1. AlertSanDiego, for example, matches alerts to your ZIP code and asks you to pin your exact location on a map. Cal OES also says to sign up in the county where you work if it isn't the one you live in.

Step 5: Sign up for your city's system too

Some cities run their own alerts on top of the county's. Riverside County names 6 of them (Banning, Corona, Moreno Valley, Palm Springs, Riverside and Temecula). It tells residents of those cities to register with both.

In Los Angeles County, the City of Los Angeles runs NotifyLA at emergency.lacity.org/notifyla. The county lists it beside Alert LA County. Check your city's website for an emergency alerts page before you assume the county's system is enough.

Step 6: Save your zones in the Genasys Protect app

Genasys Protect also has a phone app that can notify you about the places you save. Genasys says "no login or account is required." You can save up to 10 addresses and give each one a name, so all the zones from step 3 fit.

The app sends a notification "if an alert affects your current location or a saved address." In its settings you can choose All Alerts or Only Critical Alerts. Genasys gives evacuation orders and shelter in place as examples of critical alerts.

If notifications don't come through, Genasys says to check that they're turned on for the app. Location sharing should be set to always on. The app is an extra layer on top of the county alerts from step 4, so don't use it in place of them.

How do you make sure your phone gets the alerts?

Turn on government alerts in your phone's settings and save the alert numbers in your contacts. Each one takes a minute.

Step 7: Check that your phone gets Wireless Emergency Alerts

Wireless Emergency Alerts are the loud government messages that come up on a phone without a sign-up. Ready.gov says "there is no need to subscribe" and that you aren't charged for them. They go to every capable phone in the area officials target, so visitors and people who never registered get them too.

Ready.gov also says some phones need the alerts turned on. Older phones may not get them at all. Here's how to check:

  • iPhone: Open Settings, tap Notifications and scroll to the bottom. Under Government Alerts, turn on each type you want. Apple says some government alerts can't be turned off.
  • Android: Open Settings, go to Notifications and then Wireless emergency alerts. Turn on the alert types you want. If your phone's menus look different, search the Settings app for "emergency alerts".

Step 8: Save the alert numbers in your contacts

Los Angeles County tells people who register to add the Alert LA County phone numbers to their contacts. That way an alert call or text shows a name you recognize instead of an unknown number you might ignore. Your county's sign-up page or confirmation message should list the numbers it sends from.

What will the alerts say?

They'll use California's standard evacuation terms. Cal OES says "an evacuation warning means there's a potential threat to life or property," so it's the time to get ready to go. It says "an evacuation order means there is an immediate threat to life and property." That's a lawful order to leave an area that's now closed to the public.

Evacuation warning vs order vs shelter in place explains all 3 terms and what to do under each one.

Alerts don't only come by phone. Sonoma County lists the other channels. They include Nixle texts from local police and fire agencies, NOAA Weather Radio, local radio and TV broadcasts and the Hi-Lo siren on patrol cars.

San Diego County describes the Hi-Lo as a tone that goes high and then low, which "warns communities that they need to evacuate due to immediate danger." If you hear it, leave.

What do people get wrong about evacuation zones?

People mix up 2 maps that both have "zone" in the name. They also forget that zones change. Some addresses don't show a zone at all.

Your evacuation zone isn't your fire hazard zone

CAL FIRE's Fire Hazard Severity Zone map (osfm.fire.ca.gov/fhsz) rates the land for long-term wildfire hazard as Moderate, High or Very High. Building codes and defensible space rules depend on it. It doesn't tell you when to leave.

The hazard zone does matter for your home insurance, though. Casa, whose team runs this site and quotes California home insurance, has a guide to whether insurers use the hazard map. It says the map rates the land, while an insurer's wildfire score rates your house. A standard insurer that prices with a score has to show you yours. So when you look up your evacuation zone, look up the hazard zone at the same time and write both down.

Your evacuation zone is the one the alerts name. That's the zone that goes on the fridge.

If your address doesn't show a zone

If neither Genasys Protect nor your county's site shows a zone for your address, call your county's office of emergency services or the sheriff's office. Ask how they'd warn your area. Sign up for the county alerts in step 4 either way, because you register them to your address.

Zones change, so check once a year

Sonoma County says its zones "will remain mostly the same" but "may change slightly from time to time." Before each fire season, search your address again and confirm the zone name you wrote down. Make sure your county alert account still has your current phone number and email.

Questions people ask

Do I need an account to look up my evacuation zone? No. You type your address into the search bar at protect.genasys.com. Genasys says its app doesn't need a login or an account either.

Are county emergency alerts free? Yes. Cal OES says every California county offers free emergency alerts. Ready.gov says you aren't charged for Wireless Emergency Alerts and don't need to subscribe to them.

I have a landline. Do I still need to sign up? Yes, if you want alerts on your cell phone or by email. In Los Angeles, San Diego, Riverside and Sonoma counties, cell phones and email get county alerts only if you register them.

Is my evacuation zone the same as my fire hazard severity zone? No. CAL FIRE's Fire Hazard Severity Zone map rates the land for long-term wildfire hazard. Your evacuation zone is the area name that alerts use to tell you when to leave.

Does my evacuation zone ever change? It can. Sonoma County says its zones "will remain mostly the same" but "may change slightly from time to time." Look up your address again before each fire season.

Sources